Viewing Measurements In Memory - Microlife WatchBP Office ABI Instruction Manual

Viewing and transferring measurement readings
«ROUTINE» and «SCREEN» Mode
1) Switch the mode switch –The M Button can be
pressed in either the «ROUTINE» or «SCREEN»
mode to retrieve the last set of readings from the
measurements.
ABI ROUTINE SCREEN
2) Viewing the average of all measurements –
At irst an "A" will be displayed, followed by an
average of all measurements taken in the last
sequence of measurements.
30
3) Viewing MAP and PP values –
ROUTINE
4) Viewing individual measurements – Press
Ten seconds after the display of the average
blood pressure, the device will display values for
Pulse Pressure (PP) and Mean Arterial Pressure
(MAP).
SCREEN
10
seconds...
the M Button once again to view individual
measurements. The display will lash a number
"3" indicating the third measurement.
SCREEN