Taking Measurements Using Watchbp Ofice Abi; Screen" Mode - Microlife WatchBP Office ABI Instruction Manual

Taking measurements using WatchBP Ofice ABI

«SCREEN» Mode
1) Turn on the power – Turn on the device by
switching the I/O switch at the back of the device
to the ON position.
DC 7.5V 2.0A
2) Apply the cuff – Properly it one cuff to each of
the patient's arms.
Additional visual instruction can be found on the cuff
*
3) Switch to «SCREEN» Mode – Slide the Mode
Switch to «SCREEN» Mode.
ABI ROUTINE SCREEN
4) Inlation by fuzzy logic – The device will adjust
inlation pressure by fuzzy logic technology.
17
EN