Table of Contents
Advertisement
Available languages
Available languages
Door Alignment
If the space between the refrigerator doors and freezer drawer
looks uneven, you can adjust it using the following instructions:
1. Remove the top hinge cover.
2. Loosen the top hinge screws using a 5/16" socket or wrench.
3. Have someone hold the door in place or put a spacer between
the doors and drawer.
4. Tighten the top hinge screws once the door is in the desired
location.
5. Replace the top hinge cover.
FILTERS AND ACCESSORIES
Install CleanFlow™ Air Filter
(on some models)
The air filter reduces the buildup of odors. This helps to maintain a
cleaner environment inside the refrigerator.
On some models, your refrigerator's accessory packet includes an
air filter, which must be installed prior to use. On some models, the
air filter is already installed at the factory.
Installing the Air Filter
Install the air filter behind the vented door, located along the rear
interior wall of the refrigerator compartment.
1. Remove the air filter from its packaging.
NOTE: An air filter status indicator is included with the air filter.
The indicator is not needed for models that display the air filter
status on the control panel.
2. Lift open the vented door.
3. Snap the filter into place.
Air Filter Status Indicator
The control panel displays the Air Filter status.
GOOD - The air filter icon on the control lights up in BLUE.
■
ORDER a replacement - The air filter icon on the control lights
■
up in YELLOW.
REPLACE air filter - The air filter icon on the control lights up in
■
RED and "Replace Filter" will appear.
EXPIRED - The air filter icon lights up in RED and "Replace
■
Filter" flashes on the control display.
After replacing the air filter, press and hold the AIR FILTER button
for 3 seconds. The filter icons will turn off. See "Using the Controls."
When the system is reset, the air filter icon will return to its BLUE
color and the words "Replace Filter" will disappear from the
display.
NOTE: At any filter status, pressing and holding the AIR FILTER
button for 3 seconds will reset the air filter status to Good and the
air filter icon will turn off.
Replacing the Air Filter
The disposable air filter should be replaced every 6 months, or
when the status indicator air filter icon turns on and starts flashing
when the refrigerator door is opened.
To order a replacement air filter, contact us.
1. Remove the used air filter by squeezing in on the side tabs.
2. Install the new air filter and reset the status indicator using the
instructions in the previous section.
Install CrisperKeeper™ Produce Preserver
(on some models)
The accessory packet includes two produce preserver pouches,
which should be installed in a crisper drawer prior to use.
NOTE: For best performance, always use two pouches.
The produce preserver absorbs ethylene, to slow the ripening
process of many produce items. As a result, certain produce items
will stay fresh longer.
Ethylene production and sensitivity varies depending on the type
of fruit or vegetable. To preserve freshness, it is best to separate
produce with sensitivity to ethylene from fruits that produce
moderate to high amounts of ethylene.
Very Low
Sensitivity
to Ethylene
High
Broccoli
Lettuce
Spinach
Med.
Asparagus
Citrus fruit
Low
Carrots
Grapes
Produces Ethylene
Low
High
Cantaloupe
Berries
Very
High
Apples
Pears
13
Advertisement
Table of Contents
