Accessories - Kenmore 106.5133 Series Use & Care Manual

ICE AND WATER
Water is leaking from the
back of the refrigerator
Water from the dispenser is
not cool enough (on some
models)
User interface not responding
24
Possible Causes and/or Recommended Solutions
Water line connections are not fully tightened - Make sure all connections are firmly tightened.
■
See the "Connect Water Supply" section.
NOTE: Water from the dispenser is chilled to 50°F (10°C).
New installation - Allow 24 hours after installation for the water supply to cool completely.
■
Recently dispensed a large amount of water - Allow 24 hours for the new water supply to
■
cool completely.
Water has not been recently dispensed - The first glass of water may not be cool. Discard the
■
first glass of water dispensed.
Refrigerator is not connected to a cold water pipe - Make sure the refrigerator is connected to
■
a cold water pipe. See the "Water Supply Requirements" section.
Pressing user interface too fast - Wait 10 seconds before pressing any key.
■
User interface in Lock Mode - Press and hold LOCK for 3 seconds to exit Lock Mode.
■

ACCESSORIES

All Accessories can be purchased by calling 1-844-553-6667.
Stainless Steel Cleaner and Polish:
Order Part #31462A
Water Filter:
Order Part #9081
Click - SearsPartsDirect.com or Sears.com
Come on in - Buy at Stores where this refrigerator is sold