Accessories - Kenmore 106.4673 Use & Care Manual

Bottom mount refrigerator
Hide thumbs Also See for 106.4673:
Table of Contents

Advertisement

Available languages

Available languages

Installing the Produce Preserver
CAUTION: IRRITANT
MAY IRRITATE EYES AND SKIN. DANGEROUS FUMES
FORM WHEN MIXED WITH OTHER PRODUCTS.
Do not mix with cleaning products containing ammonia,
bleach or acids. Do not get in eyes, on skin or clothing. Do
not breathe dust. Keep out of reach of children.
FIRST AID TREATMENT: Contains potassium
permanganate. If swallowed, call a Poison Control Center or
doctor immediately. Do not induce vomiting. If in eyes, rinse
with water for 15 minutes. If on skin, rinse with water.
The produce preserver pouches should be installed in the housing,
located on the wall of one of the crisper drawers.
1. Remove the CrisperKeeper™ Produce Preserver pouches from
the packaging.
2. Lift up on the housing to remove it from the mounting tab.
3. Open the housing by pulling up and out on the back of the top
of the housing.
4. Place both pouches inside the housing, then snap the housing
back together.
5. Place the housing back on the mounting tab.
14
Installing the Status Indicator
The produce preserver comes with a status indicator, which should
be activated and installed at the same time the pouches are
installed.
1. Place the indicator face-down on a firm, flat surface.
2. Apply pressure to the bubble on the back of the indicator until
the bubble pops, to activate the indicator.
3. Slide open the cap on the top of the produce preserver
housing.
4. Place the indicator in the top of the housing, facing outward.
5. Slide the cap closed, and check that the indicator is visible
through the rectangular hole in the cap.
NOTE: The cap will not easily close if the indicator's bubble
has not been popped.
Replacing the Produce Preserver
The disposable pouches should be replaced every 6 months, when
the status indicator has completely changed from white to red.
To order replacements, contact us.
1. Remove the used pouches from the produce preserver housing.
2. Remove the used status indicator.
3. Install the replacement pouches and status indicator using the
instructions in the previous sections.

Accessories

Replacement Parts:
To order stainless steel cleaner or replacement filters, in the U.S.A.
call 1-844-553-6667, and in Canada call 1-800-469-4663. Ask
for the appropriate part number listed below or contact your
authorized Kenmore dealer.
Stainless Steel Cleaner and Polish:
Order Part #D22 M40083 R

Advertisement

Table of Contents
loading

Table of Contents