Table of Contents
Advertisement
PhotoCapture Center
Setting your changes as the
new default
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a
Press your new setting.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press
a or b to choose Set New Default.
c
Press Set New Default.
d
Press Yes to confirm.
e
Press Stop/Exit.
Restoring all settings to the
factory settings
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press Print Setting.
b
Press a or b to display
Factory Reset.
c
Press Factory Reset.
d
Press Yes to confirm.
e
Press Stop/Exit.
®
: Printing photos from a memory card or USB Flash memory drive
Scan to a memory card
or USB Flash memory
12
drive
Entering Scan mode
When you want to scan to a memory card or
USB Flash memory drive, press
The LCD shows:
SCAN
SCAN
Press Scan to Media.
If you are not connected to your computer
12
only the Scan to Media selection is available
on the LCD.
(See Scanning for Windows
in the Software User's Guide on the CD-ROM
for details about the other menu options.)
(Scan).
Scan to
Scan to
E-mail
Image
Scan to
Scan to
File
Media
®
or Macintosh
12
12
Scan to
OCR
Scan to
FTP
®
12
123
Advertisement
Table of Contents
