Changing The Destination Pc - Brother MFC 6890CDW User Manual

l
Press Stop/Exit.
Note
• PC Fax Receive is not supported in the
®
Mac OS .
• Before you can set up PC Fax Receive
you must install the MFL-Pro Suite
software on your PC. Make sure your PC
is connected and turned on. (For details
see PC-FAX receiving in the Software
User's Guide on the CD-ROM.)
• If you get an error message and the
machine cannot print the faxes in memory,
you can use this setting to transfer your
faxes to your PC. (For details, see Error
and Maintenance messages
on page 156.)
• Color faxes will be stored in the machine's
memory only if you have chosen
B&W(Max.LGR) as your Receiving
Priority setting. If the Receiving Priority is
set to Color(Max.LTR) faxes received
in color will be printed; they cannot be
stored and sent to your PC. (See Setting
the Receiving Priority on page 54.)
IMPORTANT
In the event of a power failure, the
machine will store your faxes in the
memory for approximately 24 hours.
However, if you choose
Backup Print:On the machine will print
the fax, so you will have a copy if there is
a power failure before it is sent to the PC.

Changing the destination PC

a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Receive.
e
Press Setup Receive.
f
Press a or b to display
Memory Receive.
g
Press Memory Receive.
h
Press PC Fax Receive.
i
Press <USB>, or the PC you want to
receive faxes.
j
Press OK.
k
Press Backup Print:On or
Backup Print:Off.
l
Press Stop/Exit.
Receiving a Fax
6
59
6