Table A-3 Optical Fiber Cable Specifications (For The Lqe010); Table A-4 Optical Fiber Cable Specifications (For The Lqe015) - Hitachi S10mini OD.RING Hardware Manual

APPENDIX
A.1.2 Optical fiber cable specifications
The types of optical fiber cables that can be used by the OD.RING module are limited. The user
must purchase the optical fiber cables satisfying the specifications shown in Table A-3.

Table A-3 Optical Fiber Cable Specifications (for the LQE010)

Table A-4 Optical Fiber Cable Specifications (for the LQE015)

Item
Optical fiber
Material
Core Outer diameter
Noncircularity
Material
Clad Outer diameter
Eccentricity
Numerical aperture (NA)
Transmission loss
Protective coating
Reinforcement
Sheath
Optical connector
Item
Fiber core material
Type of optical fiber
Core diameter
Clad diameter
Transmission loss
Optical connector
Outer diameter: 0.5 ± 0.1 mm
Outer diameter: 2.2 ± 0.2 mm
Specifications
Quarts glass
GI (grated index type)
50 µm
125 µm
3 dB/km maximum (λ=850 nm)
FC type (JIS C5970 F01 connector)
Specifications
Plastic-clad, multi-mode optical fiber
Quartz glass
200 ± 5 µm
6% or less
Fluoroacrylate resin
230 µm
6 µm or less
About 0.4
7 dB/km maximum (λ=850 nm)
Aromatic tensile strength fiber
SMA single-core optical connector
A-4
Material: Ethylene-tetrafluoroethylene
Material: Heat-resistant PVC (black)