Operation Of The Menus; Sample Programming - Bosch FB 100 Installation And Operating Instructions Manual

18 | Operation
5.2

Operation of the menus

Principle of menu guidance:
Variable names or submenu names are
•
displayed left-flush.
The selected name is highlighted.
•
Variable values are displayed right-flush next
•
to or below the name.
Submenus are called up with
•
change mode is activated (the variable value
flashes).
As long as a name is shaded, it is possible to
•
navigate with
menu
the menus without adjusting a value.

5.2.1 Sample programming

The programming steps must always be carried out according to the same principle. The
functions of the controls and the meanings of the symbols on the display are explained
on pages 2 and 3. If you want to enter a heating program, for example, carry out the
following programming steps.
If a function is blocked, a help text will be displayed. In these cases, follow the
instructions shown.
The default display continues to be shown.
Calling up main menu:
Press The display lighting switches on and the main menu is
displayed.
menu
6 720 643 259 (2010/05)
or the
/ / /
Operating Instructions
Open the flap.
Arrows in the left margin indicate that there
•
are additional menu options.
A flashing variable value can be changed with
•
.
A flashing variable value can be reset to the
•
factory settings with
The change becomes valid by pressing
•
and the name is displayed in gray again.
If the change mode is exited with a button
•
other than
the original value remains valid.
in
.
, the change is discarded and
Display
9
12
h
6
3 24
h
6 720 643 256-07.1O
9 12
h
6
3 24
h
6 720 643 262-38.1O
US/CA
15
18
21
15
18
21