Vacation Program - Bosch FB 100 Installation And Operating Instructions Manual

26 | MAIN MENU settings
6.2

Vacation program

Main menu: Vacation
For menu structure and adjustment ranges
page 23.
Use this menu if you want special operation for
several days without changing the personal
settings of the individual programs and
parameters.
In the vacation program, the assigned heating
circuit is controlled to the operating mode set in
the vacation program (frost protection is
guaranteed).
A vacation program for DHW heating can only be
set on the outdoor reset control.
Start:
•
– If the date for Start is today, the vacation
program starts immediately.
– If the date for Start is tomorrow or later,
the vacation program starts at 12:00am
(00:00)on the set day.
End: The vacation program ends at 11:59pm
•
(23:59) on the set day.
Heating: operating mode for the assigned
•
heating zone during the vacation program.
When the vacation program is active, the
standard display shows
VACATION UNTIL 09/30/2010 (30.09.2010).
Canceling the vacation program early:
B Select Vacation > Start menu and
The display shows --/--/---- (--.--.----).
B Press the dial
6 720 643 259 (2010/05)
and the dates, e.g.
press.
to store the setting.
US/CA