Table of Contents
Advertisement
3.6
Menu "Overview"
Overview
Tuesday, 10.08.21
14:50
20°
3.6.1 Adjust time
▶ Using the / and . keys, set the hour and confirm with OK
-or-
▶ Use the > key to change to set the minutes.
▶ Using the / and . keys, set the minutes and confirm with
OK.
3.6.2 Keylock
▶ Press the
key.
▶ Use the / key to navigate to Keylock and select with OK.
▶ Set using the / and . Activate Keys and confirm with
OK.
The keylock is active after 30 seconds if no actions are
taken and is indicated with the
▶ To deactivate the keylock: press the / and . keys
simultaneously for 3 seconds.
The keylock is activated again automatically if no actions
are taken after approx. 30 seconds.
▶ To disable the keylock permanently: during the 30 seconds,
set using the / and . Deactivate Keys and confirm with
OK.
The
symbol is not longer displayed.
4
Menus
▶ If necessary, navigate to the desired menu using the < and
> keys.
Depending on the system configuration, all menus are not
shown.
Chapter 3.1.3 shows a detailed example for operation.
RT 800 – 6721838947 (2023/01)
60%
0010041090-002
symbol in the display.
4.1
Menu "Overview"
Menu item
Description
Information If necessary, indicates faults.
Different values for operating the heat pump
can be called up under HP Info.
Display
If the indication in the display is difficult to see
settings
due to the lighting conditions, adapt the
brightness of the display (10 % ... 100 % for
operation, 5 % ... 25 % for idle state).
Language
You can change the language of the menus and
menu items.
Date & time Various settings for the date and time.
Temp.
If the room temperature displayed is incorrect,
sensor
correct deviations by up to ± 3 K (°C).
calibration
Keylock
Permanently activate or deactivate the keylock
( Chapter 3.6.2).
Product
Indicates the product name and software
information
version.
Factory
Only for an expert! All remote control settings
reset
are reset. Then the remote control must be
connected with the heating system and
configured again.
Table 1
4.2
Menu "Heating"
Menu item
Description
Start Boost
Starts (or ends) the time-limited increase of
(Stop
the room temperature. The duration can be set
Boost)
to 1 ... 8 hours.
Operation
There are 3 different operating modes for the
Mode
heating mode:
•
Off
•
Auto (Heating controlled by time program)
•
Manual (Heating with constant
temperature)
Cooling
There are 2 different operating modes for the
mode
cooling mode:
•
Off
•
Manual (Cooling with constant
temperature)
Menus
7
Advertisement
Table of Contents
