Changing The Domestic Hot Water Operating Mode (Time-Limited); Changing The Operating Mode For Heating Permanently - Bosch FB 100 Installation And Operating Instructions Manual

US/CA
5.1.3 Changing the domestic hot water
operating mode (time-limited)
You can use this function if you need
hot water outside the programmed
times.
B Press button briefly to activate the DHW
heating immediately (the activated function
cannot be switched off once activated).
– The DHW tank is heated up to the
maximum temperature set in the DHW
program for 60 minutes.
– With a combi boiler, Comfort mode is
activated for 30 minutes.
The display shows the changed settings. On
exceeding the specified time, the function is
reset and automatic operation is active again.
5.1.4 Changing the operating mode for heating
permanently
Automatic
(factory setting)
Automatic switch between
Comfort / Economy
to the active heating program. The FB 100
controls the room temperatures set on the
Heating levels submenu (
page 28).
Constant heating
The FB 100 controls to the room
temperature set in the Heating levels submenu
for Comfort ( section 6.3.2 on page 28).
The heating program is ignored.
Constant economy
The FB 100 controls to the room
temperature set in the Heating levels submenu
for Economy (
The heating program is ignored.
Constant frost protection
The FB 100 controls to the room
temperature set in the Heating levels submenu
for Frost ( section 6.3.2 on page 28). The
heating program is ignored.
Operation | 17
/ Frost according
section 6.3.2 on
section 6.3.2 on page 28).
6 720 643 259 (2010/05)