Typical Batch Dispense Cycle (Timer) - Graco PrecisionFlo LT Instructions Manual

Typical Batch Dispense Cycle (I/O)

Typical Batch Dispense Cycle (Timer)

Using Timer for Job End
Dispense Gun
A
Input Signal
B
Regulator
On
Valve D
On
Volume not reached, job aborted by timer
In Cycle
Output Signal
Min Volume
Output Signal
Volume reached, job ended automatically
In Cycle
Output Signal
Min. Volume
Output Signal
F . 41
IG
(Minimum Volume = Target Volume - Volume Tolerance)
A = The minimum pulse width for the Dispense Gun input signal is 20 msec.
B = Regulator On Delay
C = Regulator Off Delay
D = Gun On Delay
E = Gun Off Delay
F = The Job End Delay time, default is 4 seconds.
102
F
Target Volume Reached
Minimum Volume Reached
C
E
309738L