GRAPHTEC FC4500 Series User Manual page 3

Safety Precautions
During a plotting or cutting operation, do not touch
the writing panel, carriage, and other moving parts.
•
Such acton may cause human njury.
No touching
Even when the plotter is stopped, it may suddenly
start operating if it receives data, so be sure to keep
your hands, hair, and so forth away from the vicinity
of the plotter's writing panel and moving parts such as
the tool carriage.
•
Such acton may cause human njury.
No touching
Do not connect the plotter to a non-rated power
supply.
•
Use of a dfferent supply voltage may result n electrcal shock
or a fre hazard due to current leakage.
Use prohibited
If the plotter generates smoke, is too hot, emits
strange odor, or otherwise functions abnormally, do
not continue using it. Turn off its power and unplug
its power cord from the electrical socket.
•
Use of the plotter n such status may result n a fre hazard or
electrcal shock.
•
After confrmng that smoke s no longer beng generated,
contact your sales representatve or nearest Graphtec vendor
to request repar.
•
Never try to perform repar yourself.
Repar work by nexperenced
personnel s extremely dangerous.
Prohibited

Safety Precautions
During a plotting or cutting operation, be sure to
keep your hands, hair, and so forth away from the
writing panel, carriage, and other moving parts.
•
Such acton may cause human njury.
Make sure that the plotter is grounded.
•
If the plotter s not grounded, the operator could suffer an
electrcal shock n case of current leakage.
Ground the Plotter
Do not use the plotter in a location where it will be
exposed to water, rain or snow.
•
Such locaton may cause electrcal shock or a fre hazard due
to current leakage.
Do not disassemble, repair, or remodel the plotter.
•
Such acton may cause electrcal shock or a fre hazard due
to current leakage.
•
Contact wth the hgh-voltage parts wthn the plotter may
cause electrcal shock.
•
If the plotter requres repar, contact your sales representatve
or nearest Graphtec vendor.
No disassembly
No touching
Avoid water
Beware of
electrical shock