Straight Installation; Floor Protection Installation Requirements - Nordica ROSA REVERSE UL-C Installation And Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

c) If the product is installed on a flammable floor, a floor protection must be installed. The floors made of flammable material,
such as moquette, parquet or cork etc., must be covered by a floor protector. SUCH FLOOR PROTECTOR SHALL BE A LISTED UL
1618 MATERIAL.
The floor protector shall be placed under the appliance and it must extend at least 16-in (419 mm) beyond the front and at least
8-in (203 mm) beyond each side of the fuel loading and ash removal opening (see
inches (mm)
ROSA REVERSE UL-C
40 in (1016 mm)
ROSA SINISTRA
40 in (1016 mm)
REVERSE UL-C
ROSA UL-C
40 in (1016 mm)

3.1.1 STRAIGHT INSTALLATION

Interior Vertical Vents
A2

3.1.2 FLOOR PROTECTION INSTALLATION REQUIREmENTS

Interior Vertical Vents
A3
B2
007095315-001
A1
A2
10 in (254 mm)
10 in (254 mm)
10 in (254 mm)
A4
A3
A1
B3
A4
A2
B2
B1
Floor Protection
A1
A3
A4
10 in (254 mm)
15 in (381 mm)
10 in (254 mm)
15 in (381 mm)
10 in (254 mm)
15 in (381 mm)
Through the wall installation
A2
B2
B1
Picture 1
A3
B2
Picture 2
- distance b).
Picture 2
b1
b2
16 in (406 mm)
8 in (203 mm)
16 in (406 mm)
8 in (203 mm)
16 in (406 mm)
8 in (203 mm)
B3
A4
B2
A1
Through the wall installation
B3
B1
Floor Protection
b3
2 in (50.8 mm)
2 in (50.8 mm)
2 in (50.8 mm)
A3
B2
B2
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rosa sinistra reverse ul-cRosa ul-c

Table of Contents