To Ignite The Flame; Rosa Reverse Ul-C - How To Set The Machine To Boil Water; Rosa Reverse Ul-C - How To Set The Machine To Cook Biscuits; Rosa Sinistra Reverse Ul-C - How To Set The Machine To Boil Water - Nordica ROSA REVERSE UL-C Installation And Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

6.2.1 TO IgNITe THe FLAme

TO IgNITe THe FLAme follow the instructions below (see Cap. IGNITION) :
Š bring the flue gas control to the cooking function USE PLATE (any butterfly valve placed on the flue gas exhaust pipe must also
be opened).
Š Open the primary and secondary air control.
Š After having started the fire with small pieces of wood and waited until it is well lit.
Š bring the flue gas control to the OVEN position.
Š CLOSE any butterfly valve placed on the flue gas exhaust pipe must also be opened.
THE CONTROL REGULATION DURINg THe IgNITION PHASe IS THE fOLLOWING :
IgNITION PHASe

6.2.2 ROSA ReveRSe UL-C - HOW TO SeT THe mACHINe TO BOIL WATeR

ŠKeep the flue gas register on the cooker function – HOT PLATE USE position.
ŠPrimary air HALf open.
ŠSecondary air completely OPEN.
ŠLoad wood as described in the manual (hourly load = hourly consumption).

6.2.3 ROSA ReveRSe UL-C - HOW TO SeT THe mACHINe TO COOk BISCUITS

ŠPrimary air CLOSED.
ŠSecondary air completely OPEN - Picture 7.
bring the flue gas register to the cooker function – HOT PLATE USE position. This keeps the oven temperature stable around 230
Š
°C.
ŠLoad wood as described in the manual (hourly consumption).
ŠWait for 230 °C to be reached.
Place the tray of biscuits in the low position for 25-30 minutes (slow cooking) or in the medium position for 15-20 minutes (quick
Š
cooking).
ŠTurn the tray halfway through cooking, if necessary.

6.2.4 ROSA SINISTRA ReveRSe UL-C - HOW TO SeT THe mACHINe TO BOIL WATeR

ŠKeep the flue gas register on the cooker function – OVEN USE.
ŠPrimary air CLOSED.
Picture 8
ŠSecondary air POS.2
ŠLoad wood as described in the manual (hourly consumption).

6.2.5 ROSA SINISTRA ReveRSe UL-C - HOW TO SeT THe mACHINe TO COOk BISCUITS

ŠPrimary air register CLOSED
ŠSecondary air register POS.2
Š
bring the flue gas register to the cooker function – OVEN USE position. This keeps the oven temperature stable around 230 °C.
ŠLoad wood as described in the manual (hourly consumption).
ŠWait for 230 °C to be reached.
Š
Place the tray of biscuits in the low position for 25-30 minutes (slow cooking) or in the medium position for 15-20 minutes (quick
cooking).
ŠTurn the tray halfway through cooking, if necessary..
007095315-001
1A - PRImARY air
OPEN
.
Picture 8
.
2A - SeCONDARY air
OPEN
B - SmOkeS control
HOT PLATE USE
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rosa sinistra reverse ul-cRosa ul-c

Table of Contents