Using Pc-Fax; Pc-Fax Receive (Windows ® Only) - Brother MFC-J2510 Basic User's Manual

6

Using PC-FAX

PC-Fax Receive
®
(Windows
If you turn on the PC-Fax Receive feature,
your machine will store received faxes in the
memory and send them to your PC
automatically. You can then use your PC to
view and store these faxes.
Even if you have turned off your PC (at night
or on the weekend, for example), your
machine will receive and store your faxes in
its memory.
When you start your PC and the PC-FAX
Receiving software runs, your machine
transfers your faxes to your PC automatically.
To transfer the received faxes to your PC you
must have the PC-FAX Receiving software
running on your PC.
From , select All Programs, Brother,
MFC-XXXX, PC-FAX Receiving, and select
Receive. (XXXX is your model name.)
If you choose Backup Print: On, the
machine will also print the fax.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Fax.
d
Press Fax.
e
Swipe up or down, or press a or b to
display Setup Receive.
f
Press Setup Receive.
g
Swipe up or down, or press a or b to
display Memory Receive.
h
Press Memory Receive.
54
only)
i
Press PC Fax Receive.
j
The Touchscreen shows the message
Run PC-Fax on your computer.
Press OK.
k
Swipe up or down, or press a or b to
choose <USB> or the name of the PC
you want to receive faxes if you are on a
network.
Press OK.
l
If Fax Preview is set to Off, press
Backup Print: On or
Backup Print: Off.
m
Press .
NOTE
• PC-Fax Receive is not supported by Mac
OS.
• Before you can set up PC-Fax Receive,
you must install the MFL-Pro Suite
software on your PC. Make sure your PC
is connected and turned on.
(See Software User's Guide: PC-FAX
receiving.)
• If you get an error message and the
machine cannot print the faxes in the
memory, you can use this setting to
transfer your faxes to your PC.
(See Transferring your faxes or Fax
Journal report on page 105.)
• When you receive a colour fax, your
machine prints the colour fax at your
machine but does not send the fax to your
PC.
• To change the destination PC, repeat
steps a to m.
6