Selecting A Frequency Band; Tuning To A Frequency - Yaesu FT3DR Operating Manual

Selecting a Frequency Band

1. Press the [BAND] key to select the desired frequency
band.
• Press the [F MW] key, then press the [BAND] key
to select the frequency bands in reverse order.
The frequency bands that can be selected for each of the A and B bands are as follows:
z Frequency bands on A-band
AM BC Band
520ｋHz～1710ｋHz
144 MHz Band
137MHz～174MHz 174MHz～222MHz 222MHz～420MHz 420MHz～470MHz
z Frequency bands on B-band
AIR Band
108MHz～137MHz

Tuning to a Frequency

z DIAL knob
By pressing the [F MW] key and then rotating the
DIAL knob, the frequency will change in 1 MHz
steps.
z The numeric keys
1. Touch the frequency displayed on the LCD.
The numeric keypad appears.
2. Enter the frequency using the numeric keys.
Example: To input 145.520 MHz
[ 1 ] → [ 4 ] → [ 5 ] → [ 5 ] → [ 2 ]
Example: To input 430.000 MHz
[ 4 ] → [ 3 ] → [ ENT ]
While entering a frequency using the numeric keys, the
entry may be canceled by pressing the PTT switch or
the [BACK] key.
24
FM BC Band
76 (88*)MHz～108MHz 1.8MHz～30MHz
VHF (1) VHF (2)
144 MHz Band VHF (1)
137MHz～174MHz 174MHz～222MHz 222MHz～420MHz 420MHz～470MHz
50 MHz Band
SW Band
30MHz～76 (88*)MHz
430 MHz Band UHF (1)
470MHz～803MHz
VHF (2) 430 MHz Band
AIR Band
108MHz～137MHz
* Europe version
UHF (2)
803MHz～1000MHz
UHF (1)
470MHz～580MHz
145.000