Table of Contents
Advertisement
INTER 2V4SA
12.
Test Mode
A test mode allows you to simulate tempera-
ture changes and verify the performance of
your controller. In test mode, the tempera-
ture probe inputs are turned off, allowing to
change the temperature used by the con-
troller to operate the stages. The controller
operates as before using the new temperature
settings.
Enabling/disabling the test mode:
• Select the TEST MODE. The test mode
status is displayed.
• Use the adjustment buttons to select the
desired test mode status (On or Off).
Setting the test mode temperature:
• Once the test mode is enabled, press the
push button. The test mode temperature is
displayed, alternating with the letters "tst".
The test mode automatically ends after
4 minutes of inactivity.
INTER 2V4SA, rev.02
33
Advertisement
Table of Contents
