Temperature Set Point - Airstream INTER 2V4SA User Manual

INTER 2V4SA
• Press the down-arrow adjustment button
once more. The minimum temperature of
probe 1 flashes on the display, alternating
with the letters "Pr1 Lo".
• Press the up-arrow adjustment button. The
current temperature of probe 1 is displayed
once again.
• Press the Other Functions button to select
another probe then proceed as explained
above to see the minimum and maximum
temperature readings of the desired probe.
NOTE: If you let the display flash for more
than 10 seconds, the controller resets the min
and max temperatures currently in memory
to the current average room temperature. To
avoid resetting these values, return to the
average temperature display using the adjust-
ment button (up-arrow or down-arrow) before
the 10 second delay has elapsed.
12
INTER 2V4SA, rev.02
6.3. Temperature Set Point
The temperature set point is the target
room temperature. It can be adjusted be-
tween -40,0°C and 48,9°C (-40,0°F and
120,0°F).
I. Adjusting the Set Point
• Select the SET POINT/TEMP RAMP func-
tion. The current set point flashes on the
display.
• Use the adjustment buttons to set this
parameter to the desired value.
The temperature set point can only be
adjusted while the temperature ramp is
disabled (see following section).