Table of Contents
Advertisement
INTER 2V4SA
14.
Technical Specifications
Supply:
115/230 VAC (-18%, +8%), 50/60Hz, L1 same phases as
Stage 1 and 2, overload and overvoltage protection fuse
F12-1A fast blow.
Stage 1:
Variable output, 115 VAC (1/2 HP) / 230 VAC (1,5 HP),
Mot.10A, 50/60 Hz, fuse F1-15A slow blow.
Stage 2:
Variable output, 115 VAC (1/2 HP) / 230 VAC (1,5 HP),
Mot.10A, 50/60 Hz, fuse F2-15A slow blow.
Stage 3:
ON-OFF output, 115 / 230 VAC, 30VDC, 50 / 60 Hz,
Mot.10A, heating or cooling, fuse F3-15A slow blow.
Stage 4:
ON-OFF output, 115 / 230 VAC, 30VDC, 50 / 60 Hz,
Mot.10A, heating or cooling, fuse F4-15A slow blow.
Stage 5:
ON-OFF output, 115 / 230 VAC, 30VDC, 50 / 60 Hz,
Mot.10A, heating or cooling, fuse F5-15A slow blow.
Stage 6:
ON-OFF output, 115 / 230 VAC, 30VDC, 50 / 60 Hz,
Mot.10A, heating or cooling, fuse F6-15A slow blow.
Alarm:
ON-OFF output, 3A, 115/230 VAC, 30VDC, fuse F11-3A
slow blow.
Probes:
Low voltage ( < 5V), isolated from the supply. Operating
range: -40,0° to 48,9°C (-40,0° to 120,0°F). Accuracy:
1,0°C (1,8°F) between 5,0° and 35,0°C (41,0° and
95,0°F).
Enclosure: ABS, moisture and dust-tight.
The room temperature where the controller is located
must always remain between 0 and 40°C (32 and
36
INTER 2V4SA, rev.02
104°F). Indoor use only !
Advertisement
Table of Contents
