Test Mode - Airstream EXPERT 2V2SA User Manual

EXPERT 2V2SA
4.6.

Test Mode

A test mode allows you to simulate tem-
perature changes and verify controller perfor-
mance. In test mode, the room temperature
probe inputs are turned off, allowing the user
to change the temperature used by the con-
troller to operate the stages. The controller
operates as before using the new temperature
settings.
The test mode is used to simulate tempera-
ture changes in order to verify the controller's
performance. The temperature probe inputs
are turned off while the test is on and the
test automatically ends after 15 minutes of
inactivity.
1. From the main menu, select: TEST.
2. Use the navigation keys to select the fol-
lowing parameters:
Test Mode
Off
Room T° bypass:
78.0°F
3. Set the following parameters:
(The parameter adjustment process is explained
in section 3.2 on page 8).
Test Mode Status — Select "Yes" to enable
the test mode or select "No" to exit from
the test mode.
Temperature — Enter the simulated room
temperature. *This parameter can only be
changed when the test mode is enabled.
EXPERT 2V2SA, rev. 10
17