Industry Canada Compliance Statement (Canada Only); Disconnect Device; International Energy Star Compliance Statement; Laser Safety - Brother DCP-7020 User Manual

Chapter 5
Industry Canada Compliance
Statement (Canada only)
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.

Disconnect device

This product must be installed near an AC power
outlet that is easily accessible. In case of
emergency, you must disconnect the power cord
from the AC power outlet to shut off the power
completely.
International E
NERGY
Compliance Statement
The purpose of the International E
Program is to promote the development and
popularization of energy-efficient office equipment.
TAR ®
As an E S Partner, Brother Industries,
NERGY
Ltd. has determined that this product meets the
TAR ®
E S guidelines for energy efficiency.
NERGY

Laser safety

This equipment is certified as a Class 1 laser
product under the U.S. Department of Health and
Human Services (DHHS) Radiation Performance
Standard according to the Radiation Control for
Health and Safety Act of 1968. This means that the
equipment does not produce hazardous laser
radiation.
Since radiation emitted inside the equipment is
completely confined within protective housings
and external covers, the laser beam cannot
escape from the DCP during any phase of user
operation.
5 - 2

FDA regulations

U.S. Food and Drug Administration (FDA) has
implemented regulations for laser products
manufactured on and after August 2, 1976.
Compliance is mandatory for products marketed in
the United States. The following label on the back
of the DCP indicates compliance with the FDA
regulations and must be attached to laser products
marketed in the United States.
Manufactured:
BROTHER CORP. (ASIA) LTD.
BROTHER BUJI NAN LING FACTORY
Gold Garden Industry, Nan Ling Village, Buji,
Rong Gang, Shenzhen, China.
® This product complies with FDA for laser
S
TAR
products except for deviations pursuant to Laser
Notice No. 50, dated July 26, 2001.
TAR ®
S
NERGY
Use of controls, adjustments or performance of
procedures other than those specified in this
manual may result in hazardous invisible
radiation exposure.
Internal laser radiation
Max. Radiation Power 5 mW
Wave Length
Laser Class
WARNING
770 - 810 nm
Class 3B