Making Copies; Using The Dcp As A Copier; Making A Single Copy; Making Multiple Copies - Brother DCP-7020 User Manual

3

Making copies

Using the DCP as a
copier
You can use your DCP as a copier, making
up to 99 copies at a time.
The printable area of your DCP begins at
approximately 0.12 in. (3 mm) from both
sides and 0.12 in. (3 mm) from the top or
bottom of the paper.
0.12" (3 mm)
0.12" (3 mm)
Note
The printable area shown above is for a
single copy or a 1 in 1 copy using Letter or
Legal size paper. The printable area changes
with the paper size.

Making a single copy

1
Load your document.
2
Press Start.
Note
To stop copying, press Stop/Exit.
3 - 1

Making multiple copies

1
2
To sort the copies, press Options and
copies using the ADF on page 3-5.)
Unprintable area
3

Stop copying

To stop copying, press Stop/Exit.
Load your document.
Press Number of Copies repeatedly
until the number of copies you want
appears (up to 99).
—OR—
Press Number of Copies, and then
press or hold or
decrease the number of copies.
Note
to select Stack/Sort . (See Sorting
Press Start.
to increase or
or