Sleep Time; Setting The Lcd Contrast; Printing The User Settings List - Brother DCP-7020 User Manual

Sleep Time

Setting the Sleep Time reduces power
consumption by turning off the fuser inside
the DCP while it is idle. You can choose how
long the DCP is idle (from 00 to 99 minutes)
before it goes into sleep mode. The timer is
automatically reset when the DCP receives
PC data or makes a copy. The factory setting
is 05 minutes. While the DCP is in sleep
mode you will see Sleep on the LCD. If you
try to print or copy in sleep mode, there will be
a short delay while the fuser warms up to its
working temperature.
1
Press Menu and
1.General Setup .
Press Set.
2
Press or
General Setup
4.Ecology
Press Set.
3
Press or
2.Sleep Time .
Ecology
2.Sleep Time
Press Set.
4
Use the or
time the DCP is idle before it goes into
sleep mode (00 to 99).
Press Set.
5
Press Stop/Exit.
Note
If you want to turn off sleep mode, press Start
and Options simultaneously in Step 3.
or to select
to select 4.Ecology .
to select
to enter the length of

Setting the LCD Contrast

You can change the contrast to help the LCD
look lighter or darker.
1
Press Menu and
1.General Setup .
Press Set.
2
Press or
5.LCD Contrast .
General Setup
5.LCD Contrast
Press Set.
3
Press or
Dark .
Press Set.
4
Press Stop/Exit.

Printing the User Settings List

You can print a list of your settings.
1
Press Menu and
1.General Setup .
Press Set.
2
Press or
6.User Settings .
General Setup
6.User Settings
Press Set.
3
Press Start.
Getting started
or to select
to select
to select Light or
or to select
to select
2 - 3
2