Load Document; Using The Automatic Document Feeder (Adf) - Brother DCP-7020 User Manual

Load document

You can make copies and scan from the ADF
(automatic document feeder) and from the
scanner glass.
Using the automatic
document feeder (ADF)
The ADF can hold up to 35 pages and feeds
each sheet individually. Use standard 20 lb
2
(80 g/m ) paper and always fan the pages
before putting them in the ADF.
Improper Setup
■
DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled,
paper-clipped, pasted or taped.
■
DO NOT use cardboard, newspaper or
fabric.
■
Make sure documents written with ink are
completely dry.
■
Documents to be scanned must be from
5.8 to 8.5 in. (147.3 to 215.9 mm) wide
and 5.8 to 14 in. (147.3 to 356 mm) long.
1
Fan the pages well. Make sure you put
the documents face up, top edge first
in the ADF until you feel them touch the
feed roller.
2
Adjust the paper guides to fit the width of
your documents.
3
Unfold the ADF document output
support flap.
CAUTION
DO NOT pull on the document while it is
feeding.
Introduction
1
1 - 6