Brother DCP-7020 User Manual page 24

Chapter 1
To load paper or other media in the
manual feed slot
You can load envelopes and special print
media one at a time into this slot. Use the
manual feed slot to print or copy on labels,
envelopes or thicker paper.
1
Slide the paper guides to fit the paper
size.
2
Using both hands put one sheet of paper
in the manual feed slot until you feel the
front edge of the paper touch the paper
feed roller. Let go of the paper when you
feel the DCP feed the paper in a short
distance.
1 - 11
Note
When you put paper in the manual feed slot,
please remember the following:
■
The side to be printed on must be face up.
■
Put the leading edge (top of the paper) in
first and push it gently into the slot.
■
Make sure that the paper is straight and in
the proper position on the manual feed
slot. If it is not, the paper may not be fed
properly, resulting in a skewed printout or
a paper jam.
■
Do not put more than one sheet or
envelope in the manual feed slot at a time,
or you may cause the DCP to jam.
■
To easily remove a small printout from the
output tray, lift up the scanner cover by
using both hands as shown in the
illustration.
You can still use the DCP while the
scanner cover is up. To close the scanner
cover, push it down with both hands.