Table of Contents
Advertisement
Commissioning | A4... with HS5E(V)(L) control system Series 1x and 30
In the condition as delivered from the factory, the variable-speed mode is
deactivated. If the control system shall work in variable-speed mode, this
operating mode must be activated and parameterized (see data sheet 30237-Z
and firmware and software description 30338-FK)
To set the enable during commissioning, you use Easy Startup mode. You use
IndraWorks to configure this mode and to start it.
RE 92076-01-B/2021-04-22, Bosch Rexroth AG
69/104
Advertisement
Table of Contents
