Troubleshooting - LawnMaster CLMF4016K Operator's Manual

TROUBLESHOOTING

Suspected malfunctions are often due to causes that the user can fix themselves.
Therefore check the product using this section. In most cases the problem can be solved quickly.
WARNING
Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed by an authorized service center
or a similarly qualified specialist if you cannot solve the problem yourself!
Problem
Mower fails to start.
Mower cuts unevenly.
Mower does not mulch
properly.
Possible Cause
The safety key is not
installed.
The battery is not installed
correctly.
The battery is not charged
or power is too low.
The blade is jammed.
The battery is defective or
old.
The switch is defective.
Rough or uneven lawn.
Cutting height not set
properly.
The blade is dull.
Wet grass clippings
sticking to the underside of
the deck.
Install the safety key securely.
Check connection of battery to mower.
Charge the battery.
Stop mower and remove battery; check
for grass and debris under the deck,
clean to make blade free to move.
Replace the battery (call the toll free
helpline, at 866-384-8432).
Replace the switch (call the toll free
helpline, at 866-384-8432).
Check the mowing area.
Set the mower at a higher position.
Sharpen or replace the blade.
Wait until the grass dries before mowing.
32
Solution