WMF 5000 S+ User Manual page 31

3.11.3 SteamJet cup warmer
Burn hazard / scalding hazard
• Hot steam is produced by the SteamJet cup
warmer. The cups and adjacent surfaces also
get very hot.
> Use heat-resistant cups.
> Always place a cup upside-down over the cup
warmer before dispensing steam.
> Do not touch the adjacent surfaces
immediately after dispensing.
> Do not touch the spouts immediately after
dispensing.
> Never use the SteamJet function without the
drip grid in place or without the cup warmer
insert.
Health hazard / hygiene
• The SteamJet function is intended for
warming the cup and is not intended to be
used for cleaning.
> Always use freshly washed cups when
warming cups.
The SteamJet cup warmer can use steam to warm up
to 2 cups at the same time.
™ ™ Place a cup on the cup warmer with the opening
facing downward
™ ™ Touch the pad
Hot steam slowly flows into the cup from below.
The jet of steam stays on for the time set in the
settings.
™ ™ Touch the SteamJet button again
The steam jet stops immediately.
User Manual WMF 5000 S +
Operation | Steam dispensing
Follow the Safety chapter
w starting on page 5
Clean drip tray daily
Care
w starting on page 81
Follow the Safety chapter
w starting on page 5
SteamJet pad active / inactive
w Operating options
page 54
CAUTION
CAUTION
31