4.10 System; Cooler; Quality Check (Dynamic Milk) - WMF 5000 S+ User Manual

4.10 System

Cooler

Milk storage temperature
Enter the milk storage temperature here.
For example, < 46.4 °F (8 °C) when using Cup&Cool.
Empty message
This setting determines whether a milk empty message
will be shown. The empty message can be coupled
with a beverage lockout. This is especially important
for self-service mode, so that paid beverages are
guaranteed to be dispensed completely.
Temperature sensor
Measurement of milk temperature.
Quality check (Dynamic Milk)
External influences can cause changes to the milk
temperature, milk foam volume, and milk foam quality
in the milk system.
The "Quality check" menu can be used to reset the
settings to their base values.
™ ™ Fill the blue cleaning container with cold water
™ ™ Connect the milk hose
™ ™ Place a measuring cup with 0.132 gal (500 ml)
capacity under the spout
™ ™ Start the calibration
™ ™ As soon as the measuring cup has been filled with
0.132 gal (500 ml) (+/- 0.005 gal/20 ml), stop the
calibration
User Manual WMF 5000 S +
Software | System
DS_04_10_01
Possible with optional Cup&Cool
with temperature monitoring.
DS_04_10_13
Quality check
DI_system
Cooler
67