Verify Master/Slave Synchronized Configuration - Datalogic Matrix 220 Product Reference Manual

SOFTWARE CONFIGURATION

Verify Master/Slave Synchronized Configuration

From the Master configuration, run the application and monitor the output data from
the DL.CODE Console or a configured channel terminal.
If necessary, as a troubleshooting tip, you can temporarily apply the Reading Mask field
in place of each Code Content field to verify if all devices are reading. To do this:
1. Connect to the Master device via Ethernet and from the Data Formatting step,
2. Run the application and monitor the output data from the DL.CODE Console or a
158
MATRIX 220
change each Expected Code Field Type from Code Content to Reading Mask.
configured channel terminal.