GRAPHTEC F-Mark 2 Setup & User's Manual page 35

3. Turn on the CE7000-40, and select the language and unit displayed on the CE7000-40.
NOTICE
This setting is performed only at the initial setting of the CE7000-40.

Displayed unit of the CE7000-40 and operating units of iMark Plus software are not linked.

4. Lower the Media Set Lever of the CE7000-40, and loading the media into the CE7000-40.
Media Sensor
NOTICE
When loading the media into the CE7000-40,
loading the media so that the it covers the
Front and Rear Media Sensor by the media.
- 33 -