How To Install F-Mark2 - GRAPHTEC F-Mark 2 Setup & User's Manual

9. How to install F-Mark2

1. Peel off the adhesive tape on the back of Exit tray.
2. Put the Exit tray on the working table. Then press the Exit tray firmly on the Working table.
The adhesive tape fix the Exit tray for a short time, it may drop if you do not place the
CE7000-40.
3. Put the CE7000-40 on top of the Exit tray.
There are two ribs on the front of Exit tray. When putting on the CE7000-40 on the Exit tray, insert
the two ribs so that the fit into the gaps of the Front Cover of CE7000-40.
- 17 -