Provisioning; Table 3. Front Panel Leds - ADTRAN SHDSL E1 Installation And Maintenance Practice

LED Indication
PWR
SHDSL
T1/E1
TEST
ALM

4. PROVISIONING

The SHDSL T1/E1 NTU menus are accessed via the
DB-9 front panel female connector which supports
VT100 emulation by PC based application programs or
by a virtual terminal session over the EOC.
The parameters of the VT100 terminal should be set as
follows:
• 9600 Baud
• No parity
• 8 Data bits
• 1 Stop bits
• No Flow Control
Once these steps have been completed, the following
options will appear in the SHDSL T1/E1 NTU Main
Menu:
1. Unit Information
2. Provisioning
3. Status
4. Test
5. Performance History
4

Table 3. Front Panel LEDs

Description
Off The module is powered off
Green The module is In Service
Green SHDSL loop is trained with good signal quality
Yellow SHDSL loop is trained with poor signal quality
Red SHDSL loop is not trained
Off Port is active with alarms
Green Port is active with no alarms
Off Module is not in loopback or BERT
Green Local loopback is active or BERT is running with no errors
Yellow BERT is running with bit errors
Red BERT is running with no pattern sync
Off No alarm condition detected
Yellow Alarm condition detected remotely
Red Alarm condition detected locally
Issue 1, August 2003
Windows HyperTerminal
Windows HyperTerminal can be used as a VT100
terminal emulation program. Open HyperTerminal by
selecting
Programs/Accessories/HyperTerminal
to the section of HyperTerminal for additional
Help
information.
NOTE
To ensure proper display background, select
VT100 terminal emulation under
The menu tree in Figure 3
provisioning, performance, and test access point in the
SHDSL T1/E1 menu system.
Table 4 lists the complete set of configurable options
with settings and factory default values.
NOTE
When the NTU is in T1 mode, all related E1
options will be non-applicable. A non-appli-
cable option setting is still changeable, but will
not take affect until the option become appli-
cable.
. Refer
.
Settings
illustrates the path to every
61225236L1-5A