Blodgett BCH-30E Installation Operation & Maintenance page 7

Bch-e series electric cabinet based braising pan with heavy duty hydraulic tilt

Hide thumbs Also See for BCH-30E:

Table of Contents

ELECTRICAL CONNECTIONS

WARNING: Electrical and grounding connections must comply with the

applicable portions of the National Electrical Code and/or other local

codes.

WARNING: Disconnect the power supply to the appliance before cleaning

or servicing.

The wiring compartment is located behind the control panel. Refer to Page 4 Service

Connections.

1. Remove the wiring compartment cover and make electrical connections per the

wiring diagram located inside the control housing cover panel. The braising pan

must be grounded in accordance with requirements of the National Electrical Code or

applicable local codes. Connection from incoming lines must be waterproof.

2. Ground skillet to terminal provided in control housing. A wiring diagram is provided

and is located inside the control cover panel.

3. Replace wiring compartment cover.

SERVICE CONNECTIONS

All internal wiring for the skillet is complete.

Make service connections as indicated on page 4 and Electrical Connections above.

If faucet is provided connect water supply and check for proper operation.

Table of Contents

Bch-40e