Table of Contents
Advertisement
■ MOB (Man Overboard)
You can enter a Man OverBoard (MOB) waypoint into the transceiver with its GPS position
data, as soon as a person has fallen into the water and needs to be rescued. This enables
you to reach the MOB position even in the dark, or when you have lost visual contact.
You can select a AIS target during the MOB mode.
NOTE: If the transceiver is turned OFF during the MOB mode, the transceiver continues
the MOB mode.
D Starting MOB
1.
Push
to start the MOB mode.
• Three beeps sound.
• The plotter screen is displayed, and
current position on the plotter screen.
L The "MOB Auto Set" is "ON (30 sec)," the nature of Distress
is set to "Man Overboard." (p. 25)
2.
Push the Software Key below for your next operation.
Displays the "Compose Other" screen to send
:
an Individual call. (p. 28)
(DSC)
L Displayed only when a target is selected.
Stops the MOB mode.
:
(Stop)
Selects the display range. (p. 46)
:
(Range)
Selects the farthest target from your vessel.
:
▲
(Target
)
Selects the closest target to your vessel.
:
▼
(Target
)
Displays the details on the selected target. (p. 50)
:
L Displayed only when the target is selected.
(Detail)
L Push
Selects the list screen that you want to display. (p. 47)
:
(List)
TIP: You can also start the MOB mode when:
• Push
during navigation. (p. 59)
• Select the "Start MOB" item on the Menu screen.
[MENU] > Navigation > Start MOB
D Stopping MOB
1.
Push
or
on the screen.
• "Deactivate MOB. Are you sure?" is displayed.
2.
Push [OK].
•
disappears, and the transceiver returns to the previous screen
TIP: You can also stop the MOB mode by selecting the "Stop
MOB" item on the Menu screen.
[MENU] > Navigation > Stop MOB
is displayed in your
to the return the plotter screen.
to stop the MOB mode, depending
OTHER FUNCTIONS
.
11
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
58
Hide quick links:
Advertisement
Table of Contents
