LG MASTER-K Series User Manual page 88

Chapter 7. MK PROGRAMMING
Program
●
Start command
First work complete signal
Second work complete signal
7 - 14
Forward rotation of the motor
stops, when speed reducing
position is over-passed
Reverse rotation of the motor
stops, when speed reducing
position is over-passed.
Start (Pulse)
Reverse rotation of the motor
stops, when speed reducing
position is over-passed
Preset signal
Setting the speed reducing
position for the first stop.
Setting value=900
Set signal complementary
output
Out1 : ">"
Operation Enable signal On
Motor forward rotation signal
Setting the speed reducing
position for the second
stop. Setting value=1700
Set signal complementary
output
Motor forward rotation signal
Setting the speed reducing
position for stop at the start
position. Setting value=100
Set signal complementary
output
Out1 : "<"
Motor reverse rotation signal