Maintenance And Care - Magnum METRO User Manual

Check the rims and spokes for side and vertical impact. Spoke tension
Check, adjust.
Check tire pressure regularly.
Check tire thickness.
Check the lighting and signal system, including the headlight, adjust if necessary.
Charge the battery with the charger.

Maintenance and Care

WARNING
For reasons of safety, it is prohibited to carry out repairs and major adjustments to the product independently.
Improper work done on safety-related parts puts you and others at risk. This applies in particular to work done on the electrical steering, and
braking systems of your e-bike.
DANGER
Before doing any type of work on the electrical system, disconnect the battery, even when replacing the light or reconnecting any of the
display cables.
In case of non-compliance the manufacturer's warranty will be voided.
Any work on the motor unit, the cable harness, the battery and the charger or their disassembly will void the warranty as well.
Please note the following:
●
All maintenance carried out during the warranty period must be done by a licensed Magnum Bikes dealer.
●
Use only original spare parts.
MAINTENANCE
Crank Arm
The crank arm (1) in some circumstances can loosen while riding. Regularly check that the crank arm of your e-bike is securely tightened before
riding.
No play should be felt when pulling or pushing the crank arm to the side.
Also the bottom bracket (2) must not have any play and the pedal cranks must rotate easily. This indicates that the bearing is in the proper condition.
Check the bottom bracket regularly by moving the crank arm back and forth sideways.
Warning
If you find that the pedal cranks or the bottom bracket are loose, please contact the dealer immediately
The pedal cranks are equipped with max. 35 Nm.
Tightening:
- See exhibit (3) to tighten the screws on both sides of the bottom bracket.
M
O O
O O
O
O
M
M
O
M
O
M
O
O
O
28