Riding; Safety Instructions - Magnum METRO User Manual

6.1.1 ) ODO
The ODO records your total mileage and cannot be cleared.
6.1.2) Time
The riding time parameter is automatically reset when powering off your e-bike.
6.1.3) Trip 1
Press the SET button for 5 seconds to reset trip 1.
6.1.4) Trip 2
Trip 2 represents your most recent ride mileage and will be automatically reset every time your e-bike is powered off.

RIDING

Safety instructions

Traffic safety
The e-bike is only suitable to ride on fixed roads and paths. Do not use the e-bike in water crossings or for terrain jumps.
For your own safety do not ride your e-bike freehanded or too close to another rider.
Do not use headphones while riding.
Riding safety
For your riding safety, always verify the correct placement of the seat and handlebar height according to the body size of the rider, the prescribed tire
pressure, and check that the brakes are functioning properly before riding.
Every so often it is necessary to check the axle nuts, headset bearings, handlebars, saddle, seatpost, pedal cranks and pedals to ensure they are
tightened sufficiently.
DANGER
Be sure to use only Magnum approved replacement parts and accessories for your e-bike.
Magnum Bikes will not warranty or be liable for any e-bikes that were altered, changed or otherwise tampered with or for e-bikes that have used
generic replacement parts.
Safety Precautions
Is your e-bike fit to ride?
Perform the following checks regularly:
●
Check the tire pressure (See chapter "Technical data")
●
Check that the handlebar pedals and crank arms are properly tightened (See chapter "Steering bearings" and "Pedal cranks")
●
Check that the spokes are in place and none are loose (See chapter "Spokes").
●
After a fall or accident, make sure that the e-bike is not bent or damaged (frame, handlebars, rims, etc.).
22