Table of Contents
Advertisement
5. Recommendations and Maintenance
5.1 General Requirements
E-bikes use metal shells to cover the electric components, so we strongly advise against the use of excessive water to
wash the shells and parts around them. Use a soft cloth with a neutral solution to wipe the dirt off the shells. Afterward,
wipe everything dry with a clean soft cloth.
Do not use high-pressure water or air hoses for cleaning; this can force water into electrical components, which may cause
malfunctioning.
Do not wash plastic components with excessive water. When the internal electrical parts are affected by water the
insulator may corrode, leading to power-drain or other problems.
Do not use soap solutions to wash the metal components. Non-neutral solutions may cause discoloration, distortion,
scratching, etc.
Avoid leaving the bike outdoors
When not riding, keep the bike in a location where it will be protected from snow, rain, sun, etc. Snow and rain can cause
the bike to corrode. Ultraviolet rays from the sun can cause unnecessary fading of paint or crack any rubber or plastic on
the bike.
Recommended Torque Values
Front Wheel Nuts
Rear Wheel Nuts
Seat Binder Bolt
Seat Post Clamp Nut
Brake Anchor Nut
Handlebar Clamp Nut
Headset Expander Nut
Crank Cotter Pin Nuts
Brake Centre Bolt
5.2 Maintenance Schedule
To keep your E-bike in optimal condition and your riding experience at its most enjoyable, we strongly recommend
following the suggested maintenance schedule. You should study it and allow it to become second nature to your riding.
22-27 Newton Meters
24-29 Newton Meters
12- 17 Newton Meters
15- 19 Newton Meters
7- 11 Newton Meters
17- 19 Newton Meters
17-19 Newton Meters
9-14 Newton Meters
2-17 Newton Meters
RECOMMENDATIONS AND MAINTENANCE
16.2- 19.8 ft.-lb.
17.5- 21.3 ft.-lb.
8.8- 12.5 ft.-lb.
11.0-14.0 ft.-lb.
5.1- 8.1 ft.-lb.
12.5- 14.0 ft.-lb.
12.5- 14.0 ft.-lb.
6.6- 10.3 ft.-lb.
1.5- 12.5 ft.-lb.
17
Advertisement
Table of Contents
