Tire Care; Technical Changes, Accessories, Spare Parts - Magnum METRO User Manual

By recycling you are making an important contribution to the protection of our environment.
Charger
Dispose of the device according to the environmental regulations in force in your country. Electrical waste must not be disposed of together with
household waste. Contact your local authority or the dealer for information.
Other components
Dispose of the components in accordance with the environmental regulations applicable in your country.
Electrical waste must not be disposed of together with household waste. Contact your local authority or the dealer for recycling advice.

Tire care

To increase the life of your tires, keep your tires at the
DANGER
The tire profile thickness must not be less than 1 mm.
Driving over edges, sharp-edged obstacles, floor recesses, potholes, etc. can cause damage to the rim, spoke breakage or to the
tire (cracking), especially when the tire pressure is low. These parts are not covered under the manufacturer's warranty.
Technical changes, accessories and spare parts
Technical modifications to the vehicle may void the EC type-approval.
If technical changes are to be made, our guidelines must be observed. This ensures that no damage is caused to the bicycle, traffic and operational
safety are maintained, and the changes are permissible. The retailer carries out this work conscientiously. Before purchasing any accessories or
technical modifications, always consult a licensed Magnum Bikes dealer.
DANGER
For your own safety, we recommend using only approved accessories and original spare parts for Magnum e-bikes. For these
accessories and parts, safety, suitability and reliability have been specially tested for the bicycle.
Magnum Bikes will not be liable in any way for damage to the e-bike or any physical harm caused by faulty components that were
attached to the e-bike by the customer after market.
You can obtain approved accessories and original Magnum spare parts from a licensed Magnum dealer.
The assembly should be carried out by a professional.
26