If necessary, the bicycle should be treated with commercially available care products that are made for bicycles.
You can prevent corrosion-prone parts from becoming a precautionary measure, especially during winter, with certain care products.
DANGER
Do not use silicone-containing cleaning agents or varnish polishes for plastic parts.
- Carefully clean the frame and aluminum parts after long rides and preserve them with a commercially available anti-corrosive agent.
MAINTENANCE
Winter operation and corrosion protection
DANGER
If the e-bike comes in contact with salt water follow the instructions below
●
Immediately clean the bicycle with cold water after riding.
●
Dry the bike well.
●
Treat corrosion-damaged parts with wax-based corrosion inhibitors before use and repeat this several times.
Repair paint damage
Repair small lacquer damage immediately with varnish.
Disposal
NOTE
Electrical and electronic equipment must not be disposed of with household waste.
All batteries must be disposed of at a household hazardous waste collection point (check with your local landfill) or battery recycling drop off location,
NOT placed in the trash.
(Find a battery recycling drop off location near you here https://www.call2recycle.org/locator/)