Recommendations And Maintenance; General Requirements - Magnum Peak T5 Manual

Hide thumbs Also See for Peak T5:

Table of Contents

Recommendations & Maintenance

5. Recommendations and Maintenance

E-bikes use metal shells to cover the electric components, so we strongly advise against the use of exces-

sive water to wash the shells and parts around them. Use a soft cloth with a neutral solution to wipe the dirt

off the shells. Afterward, wipe everything dry with a clean soft cloth.

Do not use high-pressure water or air hoses for cleaning; this can force water into electrical components,

which may cause malfunctioning.

Do not wash plastic components with excessive water. When the internal electrical parts are affected by

water the insulator may corrode, leading to power-drain or other problems.

Do not use soap solutions to wash the metal components. Non-neutral solutions may cause discoloration,

distortion, scratching, etc.

Avoid leaving the bike outdoors

When not riding, keep the bike in a location where it will be protected from snow, rain, sun, etc. Snow and

rain can cause the bike to corrode. Ultraviolet rays from the sun can cause unnecessary fading of paint or

crack any rubber or plastic on the bike.

Seat Rail Clamp

Bottom Bracket Parts

Disk Caliper Mount

5.2 Maintenance Schedule

To keep your E-bike in optimal condition and your riding experience at its most enjoyable, we strongly

recommend following the suggested maintenance schedule.

Recommended Torque Values

Handlebar

Stem

Rear Wheel

Pedals

Rotor Bolts

Crank Bolts

8 Newton Meters

20 Newton Meters

35 Newton Meters

35-55 Newton Meters

30 Newton Meters

6 Newton Meters

8 Newton Meters

10 Newton Meters

Table of Contents