Advertisement
Advertisement
Table of Contents
Related Manuals for Magnum Pathfinder
Summary of Contents for Magnum Pathfinder
- Page 1 PLEASE READ ME FIRST www.magnumbikes.com...
- Page 9 Specification of H102 Display 1 / 18...
-
Page 10: Key Functions
Specification of H102 display 4. Key Functions H102 display is included 3 buttons, the distribution position is shown in the figure below, and the functions are as follows Power key, for switching machine and function confirmation, and information switching function. Adjust and increase the button, which is used to adjust the power gear, select the setting options and switch the lights. -
Page 11: Functional Overview
Specification of H102 display 6. Functional Overview 6.1. Switch on and off machine operation and display Shut down state, continue to press down 2 seconds The meter displays the welcome form and then enters the main form of the system. In the power on state, press continuously 2 seconds the meter... - Page 12 Specification of H102 display Shows the speed of the current ride. Speed unit display: You can set the select speed unit by km/h or mph. 6KM Display: When the power gear is not 0 Continuous press for opening the 6km implementation function This location will displays the 6km icon. The lights display: Power On mode hold the key more than 2 seconds, for opening or...
- Page 13 Specification of H102 display ODO: Shows the mileage accumulated by the user. TRIP: Display the user's cycling mileage. The single mileage will not be cleared when power off. The user needs to reset the mileage manually in the setting interface. RANGE: Remaining mileage.
- Page 14 Specification of H102 display 6.4. Setting item description and operation 6.4.1. Enter and exit the Settings page and instructions for the Settings Press the key at the same time to enter the setting interface. The meter on the setting page is displayed as follows: In the Settings page you can select to modify or display the items.
- Page 15 Specification of H102 display In the Settings page, press at the same time can quickly exit the Settings page, back to the main page display. Wheel setting and display Select the TIRE SIZE, and then press the key to enter the Wheel Diameter Setting and Display Items page.
-
Page 16: Battery Information
Specification of H102 display Users can adjust the display unit of mileage and speed according to actual needs. Choice of metric or British units. 6.4.3. Maximum speed setting Select the TOP SPEED, and then press the key to enter the Maximum Speed Setting page. -
Page 17: System Version
Specification of H102 display Display current battery voltage, battery capacity, number of charging cycles. If the battery is not recommended by the manufacturer, the battery information may not be displayed properly. 6.4.5. System version Select the VERSION, and then press the key to enter the Version information display page. -
Page 18: Mode Setting
Specification of H102 display in the main interface is 0-5. If OFF is selected, the adjustable range of the power gear is 0-6. 6.4.7. Mode setting Select the MODE, and then press the key to enter the Mode setting item. SPEED mode or TORQUE mode can be selected depending on the type of power sensor. -
Page 19: Common Questions And Solutions
Specification of H102 display 7. Common questions and solutions Q: why can't you turn it on? Answer: the boot needs to hold down the power button for 2 seconds. If you can't turn on the check table wire beam and the controller's connector contact is secure. - Page 20 Warranty Stay Connected @magnumbikes @magnumbikes www.magnumbikes.com info@magnumbikes.com 323-375-2666...