Using The Bike; Riding The Bike; Quick-Release Devices - Magnum Ui5 User Manual

3. Using the bike

3.1 Riding the bike

Before taking off, make sure that you activate the battery by pressing on the button
located on the side of battery.
The 4 LEDs located on the top of the battery indicate the charge level.
Turn on the display unit on the handlebar. Select your desired assistance level and
begin pedaling. You'll find the motor start working as soon as you start pedaling.
When you use the brakes, the contactor located within these brakes will halt the
motor's assistance immediately.
The left brake lever controls the front brake. The right brake lever controls the rear
brake.
You can also use the bike without electric assistance by turning off the battery
(switch off the battery by adjusting the assistance level on 0). The motor will then
feature zero resistance: you'll be freewheeling. Select the appropriate gear by
activating the 7-speed gear lever.

3.2 Quick-release devices

Tighten the adjusting nut by hand and move the quick release lever to the closed
position. You should feel considerable resistance while closing the lever. If not, re-
open and re-tighten the nut, then move the lever to the closed position so it is in line
with the frame.
9