Withings BPM Connect Instruction Manual page 15

Important information
Requirements
In order to use your BPM Connect, you need an iOS (10.0
or higher) or Android (6.0 and higher) device to install
it. Thereafter, the product can be used without your
mobile device on you, thanks to the Wi-Fi and Bluetooth®
connections.
Important safety information
Consult your doctor during pregnancy, or if you suffer from
arrhythmia or arteriosclerosis. Please read this section
carefully before using the BPM Connect Wi-Fi Smart Blood
Pressure Monitor.
Intended use
The BPM Connect is a digital monitor intended for use
in measuring blood pressure and heart rate. The device
is intended to be used in a human adult population with
an arm circumference of 9 inches to 17 inches (22 cm to
42 cm). BPM Connect is a medical device. Contact your
physician if hypertensive values are indicated.
General safety and precautions
- Do not forcibly bend the arm cuff.
- Do not inflate the arm cuff when it is not wrapped around
your arm.
- Do not apply strong shocks and vibrations to the blood
pressure monitor or drop it.
- Do not take measurement after bathing, drinking alcohol,
smoking, exercising or eating.
- Do not immerse the arm cuff in water.
- Do not use with a pacemaker, a defibrillator or other
electric implant.
- Use on adults only.
- Do not use on children or pets.
Android is a trademark of Google Inc. iOS is a trademark of
Apple Inc.
Portable and mobile RF communications equipment should
be used no closer to any part of the equipment or system,
including cables, than the recommended separation distance
calculated from the equation applicable to the frequency
of the transmitter. Interference may occur in the vicinity of
equipment marked with the following symbol.
14-15