Withings BPM Connect Instruction Manual page 27

Declaration – electromagnetic emissions and immunity
for equipment and systems that are not life-supporting and are specified for use only in a shielded location
The Wi-Fi Smart Blood Pressure Monitor declaration electromagnetic immunity
This Wi-Fi Smart Blood Pressure Monitor is intended for use in the electromagnetic environment specified below. The customer or the user of the
Wi-Fi Smart Blood Pressure Monitor should ensure that it is used in such an environment.
Immunity test
Conducted
RFIEC 61000-4-6
Radiated RF IEC 61000-4-3
IEC 60601 test level Compliance level
3 Vrms N/A
150 kHz to 80 MHz
3 V/m N/A
80 MHz to 2.5 GHz
Electromagnetic environment – guidance
N/A
Portable and mobile RF communications equipment should
be used no closer to any part of the equipment or system,
including cables, than the recommended separation distance
calculated from the equation applicable to the frequency
of the transmitter. Interference may occur in the vicinity of
equipment marked with the following symbol.
24-25