Basic Maintenance Knowledge; Types And Timing Of Maintenance - Roland EU-1000MF User Manual

Basic Maintenance Knowledge

Types and Timing of Maintenance

This section explains how to clean and maintain this machine.
Maintenance Frequency
WARNING
WARNING
CAUTION
CAUTION
To use this machine under its optimal conditions, maintain it periodically. The print head nozzles, in particular, need
to be maintained appropriately because the nozzles, which inject ink, can reduce printing quality when attached
with dust and dirt.
Maintenance
These are the maintenance items that are required on a daily basis.
Maintenance frequency
Before the start of daily
operations
When printing is resumed
After daily operations are finished
When printing quality has
decreased
Maintenance to perform as
needed
50
1.Introduction
Clean the machine periodically. Debris or dust collecting on the parts in use may cause
current leakage or deterioration of the insulation, resulting in fire and smoke hazards.
Store maintenance cleaning liquids in a cold and dark place. Keep them out of the reach
of children.
This printer uses ultraviolet curable inks (UV inks). Be sure to wear gloves and goggles
when performing maintenance.
Be sure to inspect the machine and replace specified parts periodically.
Maintenance item
Cleaning the print heads
Cleaning the print heads
Adjusting negative pressure of the print
heads
Cleaning the UV lamp
Cleaning the table and outside of the
machine
Cleaning the maintenance station and its
surrounding areas
Removing inks adhering to the table
Refilling inks
Disposing of drained ink
Reference
P. 54 "Cleaning the Print Heads"
"
P. 70 "Cleaning and Printing Test"
"
P. 82 "Liquid Cleaning"
"
P. 87 "Adjusting Negative Pressure of the
"
Print Heads"
P. 62 "Cleaning the UV Lamp"
"
P. 59 "Cleaning the Table and Outside of
"
the Machine"
P. 60 "Cleaning the Maintenance Station
"
and Its Surrounding Areas"
P. 65 "Removing Inks Adhering to the
"
Table"
P. 66 "Refilling Inks"
"
P. 68 "Disposing of Drained Ink"
"