Table of Contents
Advertisement
C
Clean the areas shown in the figure below using new non-woven fabric impregnated with cleaning
liquid.
IMPORTANT
• Wipe off the cleaning liquid completely.
• Do not touch the nozzle surfaces when cleaning the print heads and their surrounding areas.
• Clean the entire bottom surface and both side surfaces of the print-head carriage by removing adhering ink.
D
Press the [Ink Flush button] on the left side of the print-head carriage to flush ink from the print
heads.
Hold down the [K] button for 10 seconds.
1
Hold down the [C] button for 10 seconds.
2
IMPORTANT
Do not hold down the buttons for more than 10 seconds.
The ink storage, which is located on the upper side of the print head, runs out of ink. This allows air to enter the ink tube,
causing ink discharge failure or decreased printing quality.
Maintenance Before the Start of Operations
: Area to clean
2.Maintenance
83
Advertisement
Table of Contents
